Combination Saw 0141


FIG. 4056. COMBINATION SAW.
(Showing machine with Self-Feed Ripping Device
partly detached )
This is a new Combination Sawing machine designed for Carpenters, Cabinet Makers, Box Makers, Pattern Makers and Wood Workers generally. It is strong, substantial and thoroughly well built, having a strong iron frame and adjustable boxes; is suitable for Ripping, Cross Cutting, Mitering, Rabbetting, Grooving, Gaining, Dadoing, Edging Up, and with the extra attachments, for Boring, Shaping, Scroll Sawing, Beading, etc.
The Self-Feed Ripping device has a feed which is self-adjusting for all thickness of work, and is positive in its action. The feed has three changes of speed (it should be understood that the Self-Feed Ripping device is operated by hand power). The hand power is soarranged as to enable the operator to stand erect and in a natural position. The table is 28 in. wide by 36 in. long; the middle portion, 10 by 36 in., is of iron planed perfectly true; in the center are fitted two hard wood strips which are easily adjustable. In the iron are two plain grooves running the entire length, and two adjustable sliding cross-cut or miter gauges, well fitted to the groove, thus securing accuracy. The table top is provided with right and left-hand Ripping Gauges, and is hinged so that it may be adjusted up or down by the hand-screw in front for Rabbetting, Grooving, Dadoing, etc. It has Adjustable Extension Rolls both front and rear, hinged in such a manner that they can be instantly opened up, adding 4 ft. to length of table for ripping long stuff, and can be closed down out of the way when not required. The Front Extension Roll is intended to be used only with the Self-Feed Ripping device. Any size saw from 5 to 10 in. can be used, and will project as follows :
5 in. saw, 1 in. ; 6 in., 14 in. ; 7 in., 2 in.; 8 in., 21 in.; 10 in., 31 in. above top of table.
With this machine one man can rip soft wood up to 31 in., and hard wood to 2 in. thick. Can do four times as much work as with a hand saw, the machine besides being equally valuable for cross-cutting and various other work.
Combination Saw, complete, as shown in cut, with one each, 7 and 10 in. Rip, and one 7 in. Cross-Cut Saw, $75.00.
We can furnish a pulley so that the machine can be used for power, at an additional cost of $2.00. Special Countershaft for power, $12.00. Weight, 480 lbs.; boxed, 590 lbs.
OUR HAND AND FOOT POWER MACHINES ARE WELL MADE AND ARE SUPERIOR IN ALL RESPECTS. IN COMPARING OUR PRICES WITH THOSE OF OTHER MAKES, PLEASE COMPARE CAPACITIES AND WEIGHTS. MANY OF THE MACHINES ON THE MARKET ARE VERY LIGHT AND SO FLIMSILY MADE, THAT THEY RATTLE THEMSELVES TO PIECES WITHIN A YEAR OR TWO.
FIG. 4057. PLAIN COMBINATION SAW.
This represents the same machine as the foregoing without the Self-Feed Ripping device, Front Extension Roll, and other parts pertaining to same. The Self-Feed Ripping device cannot be fitted to this machine after leaving factory. It is suitable for Cross-cutting, Mitering, Rabbetting, Grooving, Dadoing, etc., etc. It serves very well for light ripping, but where there is much of this work to do, the other machine is preferable. Price, with one each, 7 in. Rip and Cross-Cut saws, $60.00. Pulley for power, $2.00;
Special Countershaft for power, $12.00.
Weight, 360 lbs.; boxed, 450 lbs.
COMBINATION SAW ATTACHMENTS.
Desirable features about these machines are the various Attachments which can be furnished at moderate expense.
FIG. 4058. SCROLL SAW ATTACHMENT.
This attachment can be easily and quickly placed in position, thus providing a serviceable scroll saw that will cut to 3 in. thick and swing 24 in. Scroll Saw Attachment, with 1 doz. 8 in. blades, $7.00.
FIG. 4059. BORING ATTACHMENT.
Can be put on or taken off instantly, has an Adjustable Sliding Table and stops, to gauge depth of hole. The spindle has socket f diam. for round shank bits. Price $8.00.
BITS FOR BORING ATTACHMENT.

The Bits we use for this are the genuine Russell Jennings' machine bits with 1 in. round straight shank.
Each, $0.50 $0.55 $0.60 $0.70 $0.75 $0.85
Each, $0.90 $1.00 $1.10 $1.30 $1.50
Intermediate and larger sizes can be furnished when desired.
FIG. 4060. MOULDING ATTACHMENT.
This is a valuable attachment; is de-signed for edge moulding, beading, etc., using the Moulding Cutters shown elsewhere. Spindle has vertical adjustment for different thicknesses, and is made to run in either direction to suit the grain of the wood.
Price of Moulding Attachment, $7.00. Cutters as per list, (see index).

TedsWoodworking Plans and Projects