The tools here described are of latest design; valuable, convenient and labor-saving; in many instances will take the place of machinery much more costly
FIG. 5111. DADO MACHINE.
Used for making square turned work, such as Balustrades, Plinth and Corner Blocks, for cutting Beads in moulding on segment casing, etc., etc.
FIG. 5112. SAMPLES OF PLINTH AND CORNER BLOCKS
This Linharn Dado Machine can be attached to any wood-working machinethat has a mandrel for wood-working heads and saws; is simple in construction, easy to operate, and not liable to get out of order. For gaining or plain dadoing alone it is worth the price in any planing mill. Will cut plain dado from
to 3 in. wide. The illustrations re-present but a few out of thousands of styles that can be made.
The heads work on any size mandrel from $ to 2i in diam., and are fastened with Clamping Set Screws, using no nut or collar. To use the set of three heads the mandrel should not be less than 4 in. clear of head. If saw arbor is not long enough to admit head, by sending us size of thread, length and whether right or left-hand, we can furnish sleeve for same. Price of Sleeve, $5.50.
Linham Dado Machine complete, including 3 Brass Heads, 26 Assorted Cutters, Wrench, Collar and set of Files, $55.50. In ordering, be particular to give exact size of mandrel.
SAMPLES OF BALUSTRADES.
ROSETTE CUTTER AND HOLDER. This is the latest improved Rosette Cutter; will cut Rosettes from in. up, and will do the work in from one-tenth to one-fourth the time required by hand. A boy can operate it as well as the most experienced turner. Every Rosette is a duplicate of the others. This Cutter may be used in any lathein which the arbor and tail stock does not revolve when being moved back-ward and forward. Speed should be 2500 or over.
The tool consists of Cutter Holder, and separate Cutter for each style of Rosette required. One holder only is necessary, as any of the Cutters will fit in this.
Cutter Holder for lathes, $6.65 ; Cutters for lathe, each, $5.50. In ordering Holder, give outside diameter of arbor.
BORING MACHINE CUTTER.
This Rosette Cutter is made with double cutters suitable for use in boring machine. Speed 2000.
Holder for Boring Machine, $6.65; Cutters (two required), per Set, $8.90.
No. 18. No. 30.
FIG. 5115. ROSETTE PATTERNS. Cutters for above patterns for 31 in. rosettes are kept in stock. Cutters
FIG. 5116. BORING HEAD.
The cut illustrates a Boring Head for large holes. This Head, instead of reducing the entire core of hole into shavings, cuts a margin about 'a in. wide. Will cut a hole perfectly smooth with-out breaking out edges when going through. Requires but little power to operate. The Head is not adjustable, but extra Knives can be fitted for any additional size required, if within the range of 2 in. per head.
In ordering, state thickness of stuff if more than 1i in. Also upon what machine it is to be used.
Price, 2 in., $9.00; 3 in., $11.00; 4 in., $12.50; 5 in., $16.00; 6 in., $20.00.
Extra Knives for 2, 3 or 4 in., per set, $5.60; for 5 and 6 in., per set, $7.20.
FIG. 5117. SMALL GRINDSTONE.
We recently came across a concern that makes a line of Small Grindstones of fine grit. The Lathe Grindstones, priced on page 833, are rather coarse, being the same grit as the regular large stones.
These Stones will be found very desirable for many kinds of work. They are from 1 in. to 1k in. thick and have 1 in. round holes in the 44, 6 and 8 in. sizes, and 1 in. hole in the 11 in. size.
Prices, 4k in., $0.55; 6 in., $0.60; 8 in., $0.75; 11 in., ".1.95.
for any design or size rosette at same price as regular cutters. In ordering Cutters, send sample of rosette to be cut, or drawing of sectional view, full size.