FOUR-SIDED MOULDER. MOULDERS OR, STICKERS. 0175

We describe and price here a very complete line of Moulders, in fact, two lines. Such machines as are marked No. 1 are of very recent design, and have all the latest improvements. Ma-chines classed as No. 2 are Standard machines; none of them are of old do-sign, but they are not as heavy, nor as " Up-to date " as the others, although we believe they will be found equal in all respects to the majority of machines in the market.  

This is especially adapted to work small Mouldings, Beads, Trunk Slats and Sash, also Blind Slats. In general style it is similar to the machine shown
in Fig. 5217. Feed Works consist of two Upper Steel Fluted Rolls, and one Large Friction Roll in the bed. Table will lower 20 in. Side Spindles run on Patent Self-oiling Steps. The under Cutter has Vertical Adjustment, and is provided with a substantial Pressure Foot. The Outside Head Stock is clamped to table at two points ; may be placed at any angle, and adjusted horizontally or vertically without disturbing the angle.
Five Heads and 4 sets of Cutters are furnished with each Four-Sided Machine.
4-Sided Machine $150.00
3-Sided " , 131.25
2-Sided 112.50
.1-Sided " 93.75
Weight 1000 lbs.
No. 2.
6 INCH FOUR-SIDED MOULDER.
This machine is shown in Fig. 5217. Top Head has Lateral Adjustment of 1 in. Under Head has Lateral and Vertical Adjustment. Both inside and out-side Heads may be set to an angle, and adjusted vertically or horizontally with-out disturbing the angle. Four rates of Feed are provided for; Table will lower 15 in.; Tail-piece to bed is hinged and swings out from under head to give access to cutters. Side Spindles run on Patent Self-oiling Steps ; Adjustable Throat Plates on each side of under head.
Four Steel 4-Slotted Heads, with 1 pair of Straight Bits on each, and 1 Steel Cap or Sash Head ; Wrenches, Spur Feed, and Filling-up Collars are furnished with each Four-Sided Machine.
4-Sided Machine $208.00
3-Sided 188.00
2-Sided " 168.00
1-Sided " 148.00
Weight 1500 lbs.
No. 1.
6 INCH FOUR-SIDED MOULDER.

TedsWoodworking Plans and Projects

This machine is shown in Fig. 5218. In general construction it is similar to the No. 2. The top Head is provided with an outside support connected with
This machine is shown in Fig. 5219; is very heavy and rigid. Frame is cast in one piece and well braced. Feed Works consist of 2 Top Rolls, 3 in. diam., and 1 Roll in Bed, all driven and power-fully geared together. Hood over top head is provided with Patent Hinged Chip Breaker. Inside and Outside Head Stocks are provided with Horizontal and Vertical Adjustments, and may be set at an angle. The belts for these two Heads pull directly against the bottom of the boxes. Top Head Stock has Lateral Adjustment, and Arbor is provided with substantial out-side bearing. Inside Head has Adjust-able Chip Breaker and Take-up. Ma-chine has fall Bearings to raise table. Table is clamped to frame at two points, and will lower 9 in. 4 Steel 4-Slotted Head and 1 Steel Cap Head are furnished with each Four Sided Machine. Machine has four rates of Feed, viz: 24, 32, 38 and 46 ft. per minute.
4-Sided Machine $280.00
3-Sided 260.00
2 Sided 240.00
1-Sided 220.00 Weight 2500 lbs.
FIG. 5219. NO. 1—7 INCH FOUR-SIDED MOULDER.
the table, the inside Head with Adjust-able Chip Breaker.
4-Sided Machine $220.00
3-Sided " 200.00
2-Sided " 180.00
1-Sided 160.00 Weight 1600 lbs.
NO. 1—7 INCH FOUR-SIDED MOULDER.

FOUR-SIDED MOULDER. MOULDERS OR, STICKERS.